Options Tips for The Average Joe

What are the Most Usual Types of Foundation Repair?

The most petrifying home repair home owners might encounter will probably the problems with their house foundations. Replacing your roof is pretty easy; but, repairing your home foundation is a whole different side of it. After all, the foundation is the main support of your house. When it comes to this problem, it is usually caused by one thing -water. This is why you truly need the help of Foundation Repair Contractors to properly address your issue.

Moreover, the methods used in repairing the foundations may vary, this depends on the site condition and geographic area for the repair. Until the late 1970s came, the most used simple method is using a concrete for the repair. So, written below is a list of some most common and popular methods used for foundation repairs in these days.

Firstly, we have the Helical Piers. Helical Piers are made for exterior foundation repair and interior slap repairs. Helical Piers are truly helpful for both new construction and as foundation repair method. And, light loaded areas such as structures with vinyl siding or porch columns best matches Helical Piers. Helical Piers are the most underused and adaptable pier in the market.

Second, we have the Steel Piers. The launch of steel piers restructured the process of foundation repair. When implemented, steel piers do not disturb a lot of landscapes and take less time as compared with the traditional concrete piers. Steel Piers have now advanced and have become more scientific to implement.

Third is the High Density Polyurethane Foam. Slab mending is now simplified with High Density Polyurethane. In here, insertion or injection of the foam in a checkerboard grid that is approximately 7 feet on the center of the moved area happens. Also, High Density Polyurethane became popular in the market in these days because of the repair speed and cost it offers. But then, consumers must also remain careful if the Heating, Ventilation, and Air Conditioning ducts run through the floor because the foam might clog and infiltrate them. To ensure that there are no leakage in the supply and drain lines, the consumers must also perform plumbing tests prior to the foam injection.

Fourth is that we have the Concrete Pier Foundation Repair. Typically, foundation repair contractors use poured in place concrete piers in the initial construction phase of structures. However, these can also be used in foundation repairs. This method was actually one of the best foundation repair method before the invention and introduction of hydraulic driven steel pier.

Fifth is that we have the Segmented Pier. This is comparatively one of the newest products in the industry. This product for foundation repair is popular in the industry since it is not that expensive.

Supporting reference: look at here